• Single, non-contact, removable rubber shield for easy cleaning and less friction
• High speed Nylon™ ball retainer for greater strength and speed
• Pre-lubricated with Speed Cream™ racing lubricant
• Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible

• 8 Nuts and 8 Bolts per pack!
• High quality steel
• Available in 7/8", 1.0", 1.25" and 1.50" to cover all your skateboards set-ups
• Lifetime warranty against manufacturer defects

Our Montana Skate Elk shop tees are back by popular demand. Thrasher, but make it country. Also available in a sweatshirt. 

T-Shirts made by Garage Tees in Missoula, Montana

A new twist on our classic logo, presenting the Board of Missoula Slimeball t-shirt. Big thanks to our friend Chris Fairbanks for this amazing graphic.

Full size print on the back and a smaller left chest print on the front. Printed right here in Missoula by the awesome Garage Tees crew.  Rep your hometown skateboard and snowboard shop.

BIG BALLS, the newest member of the REDS family.  BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.  

These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.  This makes BIG BALLS a great choice for skaters looking for more speed and longer life in their bearings.

Skaters have made the Bones REDS family of bearings their #1 choice because of the consistent quality, speed, durability, and value.

Alishon Kelly's "Lip Bomb" graphic has found it's way on a skateboard and we couldn't be happier! And to have the decks be from Wouldshop Skates ta' boot; good stuff.

Support your local, talented and incredibly kind shop employee Ali and snag yourself one of these decks!

Burton - Winder Speed Zone Snowboard Boot Laces Upper & Lower

Includes re-lacing tool too!

The Old School Skate was modified from the original 1973 Full-Tec and features a retro shape that sits low on your head, offering great impact protection. The premium heat-sealed liner keeps you comfortable and the 11 open vents keep you cool. The more round shape practically molds to any shape head.

SHELL • High-Impact ABS offers durable, lightweight protection

LINER • 2-stage foam offers perfect mix of protection and comfort

VENTS • 11 Open Vents allow airflow to keep your head cool

INTERIOR • Dri-Lex® wrapped 2-stage liners wick away moisture

FIT • 5 sizes - XS, S, M, L, XL

***Sold in a pair

Ace trucks feature rockered hangers, which are thicker in the center to provide strength against grind-shock and offset your grinds to keep you locked in. The low profile design combined with a lower kingpin reduces hang-ups.

Our 4WD Cool All Temperature, universal ski and snowboard wax is a great all purpose wax at a great price. Race proven formulas using the highest quality of hydrocarbon waxes. No additives. Available in four temperatures that offer the best value in the industry! Contains no flouro.

• Warm = 32ºF to 28ºF (0ºC to -2ºC)
• Cool = 28ºF to 21ºF (-2ºC to -6ºC)
• Cold = 21ºF to 5ºF (-5ºC to -15ºC)
• Ice Cold = 5ºF to -22ºF (-15ºC to -30ºC)
• Base Prep = Used to clean and protect base 32ºF (0ºC)

Size: 165g

Also sold in smaller 65g bars, 750g bulk bars and 5 pack w/assorted temperatures.

See the complete line of 4WD Waxes

Hot Waxing: Base must be clean & dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth.

Triangle scrapers offer more sharp edges to use.

Our 6 inch long, clear, ultra thick snowboard wax scraper is made from 1/4" thick high grade acrylic producing a super sharp edge and the extra thick material is heavy duty and has zero flex.  Acrylic is a better material than simple plastic because of the ability to get a sharp edge.  If the edge gets built up with wax or starts to feel dull run it across a steel file or some sand paper to sharpen it back up.  Notched corner allows for easy cleaning of wax off your steel edges. All you need to get the job done.

Size: 3" x 6" x 1/4" thick

Our 12 inch long snowboard wax scraper allows you to cover a lot of ground with each pass.  Made from 1/8" thick high grade acrylic producing a super sharp edge.  Acrylic is a better material than simple plastic because of the ability to get a sharp edge.  If the edge gets built up with wax or starts to feel dull run it across a steel file or some sand paper to sharpen it back up.  Notched corner allows for easy cleaning of wax off your steel edges. All you need to get the job done.

Instructions:

1. Select correct temperature specific wax by checking mountain conditions/snow report...(actual snow temperature, not air).

2. Press wax on the iron and distribute small drips of wax over the entire base. DO NOT ALLOW IRON TO SMOKE!

3. With iron in hand, slowly pull the iron over the wax drips smoothing them into a sheet of wax that covers the entire base tip to tail.

4. Let the wax cool 10-15 minutes, then scrape with a sharp plastic scraper. DO NOT USE a steel scraper.

5. Use a wax brush or fiber pad, remove excess wax from base, brushing from tip to the tail. This allows your base to glide fast. 

SMALL PAD. BIG BITE.

• 1 per pack
• 12 Spikes
• Dimensions: 2.9” x 3.7”

This is the mini version of our best selling spiky traction. Same size teeth (just fewer of them) for those who want maximum grip for minimum dough.

TECHNOLOGIES:

• SHARK TOOTH SPIKES™ - Ovular spikes modeled after nature’s best bite.
• CRUBBER™ - Our flexible rubbery replacement to the stomp pads of yesteryear.
• EASY CUT GROOVES™ - Flex with your board to let it bend naturally, and easy to cut and spread out your spikes.

Keep your foot where it should be.

We mold and then produce these pads in our Belfair Factory!

Instructions: 

1. Clean board surface and dry completely. Use ONEBALL base cleaner, rubbing alcohol, or another solvent may be needed to get off dirt. Let the solvent dry for 10 minutes. 

2. Mark area where pad will be placed with pencil first. Peel off backing of pad. Place stomp pad in front of your back foot binding and center edge to edge.

3. Only stick once, do not move, making sure not to damage adhesive. Use your fingers to press on pad with firm pressure. Use a hair dryer or heat source to help the pad stick if you want. 

4. Let stomp pad adhere to board for a minimum of 12 hours before using. Better yet, bring your board inside your house and let the stomp pads rest overnight. 

THEY'LL BITE YOUR BOOT.

• 1 per pack
• Dimensions: 3.75” x 5.5”

Simple, clean, and conventional these toothy spikes bite your boot treads for maximum foot hold. The patent pretending CRUBBER™ material allows your board to flex naturally, and the groove gills allow you to easily cut, customize, and arrange this pad to your exact needs.

Developed to meet the demanding traction needs of Crab Grab team rider Scott Stevens, this design offers riders of all ability levels the perfect traction option. If it's good enough for Scott, it's good enough for the rest of humanity. 

“Nothing works better. You can't argue with science.”-Scott Stevens

TECHNOLOGIES:

• SHARK TOOTH SPIKES™ - Ovular spikes modeled after nature’s best bite.
• CRUBBER™ - Our flexible rubbery replacement to the stomp pads of yesteryear.
• GROOVE GILLS™ - Flex with your board to let it bend naturally, and easy to cut & customize.

This is a 165g bar of our F1 Graphite Plus. An all temperature hydrocarbon ski and snowboard wax with micronized graphite additive. Fast in all snow conditions but especially excels in cold or dirty snow conditions. Use this universal wax alone or as a mix with any alpine wax for added speed.

Optimal Temperature: 28ºF to 21ºF (-2ºC to -6ºC)

Size: 165g

Hot Waxing: Base must be clean & dry. Hot wax your base with the temperature specific wax for best results. Let wax cool completely and scrape with a plastic scraper. Brush out remaining wax from base and polish smooth.

Rub On: Apply wax to base by hand and cover completely. Use a waxing cork to polish wax into base with firm pressure. A scraper can be used and then use a waxing brush to polish the base...horse hair brush is best for this.

Oh yeah! Our great friend, Missoula native, and extremely talented stand up comedian Chris Fairbanks created this awesome slimeball style Board of Missoula graphic and we put it on some griptape! 9 inches wide and it will definitely help you shred better...